Monday, October 4, 2010

KENKO TELEPLUS DGX & DG SERIES Uniplus Tube DG 25






EXTENSION RING
UNIPLUS TUBE DG 25

Kenko UNIPLUS TUBE (extension ring) is an accessory exclusively designed for use with standard AF lenses to shoot subject at closer distance with higher magnification.

Magnification ratio for TUBE 25 is about 1/2 with 50mm standard lens. Perfect coupling with automatic aperture, TTL metering and AE mechanism.

KENKO TELEPLUS DGX & DG SERIES Auto Extension Tube Set DG





12mm, 20mm, 36mm
EXTENSION TUBE SET
AUTO EXTENSION TUBE SET DG
Extension tubes are designed to enable a lens to focus closer than its normal set minimum focusing distance. Getting closer has the effect of magnifying your subject (making it appear larger in the viewfinder and in your pictures). They are exceptionally useful for macro photography, enabling you to convert almost any lens into a macro lens at a fraction of the cost while maintaining its original optical quality.

The DG extension tubes have no optics. They are mounted in between the camera body and lens to create more distance between the lens and film plane. By moving the lens father away from the film or CCD sensor in the camera, the lens is forced to focus much closer than normal. The greater the length of the extension tube, the closer the lens can focus.




KENKO TELEPLUS DGX & DG SERIES MC4 AF 2.0 DGX





2X TELEPHOTO CONVERTER
MC4 AF 2.0 DGX


Placed between the camera body and lens, a teleconverter contains a set of optics that will effectively increase the focal length of any lens with which it is used. The KENKO TelePlus MC4 AF 2.0X DGX converter has the effect of multiplying the focal length of your lens by 2.0x, turning a 300mm lens into an equivalent 600mm lens.

The MC4 AF 2.0X DGX converter has genuine Gate Array IC (Integrated Circuitry). It means the converter’s unique circuitry maintains signal integrity between the camera body and lens. The 4-element design is made with high quality multi-coated optical glass supplied by Hoya Corporation, the world’s largest manufacturer of optical glass.

Full AF operation with the TelePlus MC4 AF 2.0X is possible using camera lenses with open apertures of F2.8 or brighter. Please be aware that AF will work properly only if there is enough light and contrast on the subject to activate the camera’s AF sensors. (Manual focusing may be necessary when using lenses with smaller open f-stop values than that given above.)

The DGX TelePlus converters have updated circuitry to record exif data more accurately. In the exif exposure data (meta-data recorded with a digital picture) DGX converters record the equivalent aperture and focal length of the lens setting plus teleconverter. Optically and mechanically they are identical to the prior high-quality DG series converters.

MC4 AF 2.0X DGX are available for Canon EOS (EF, not EF-S), Nikon AF and Sony Alpha
.Important Note:The Kenko DGX TelePlus converters are not compatible with the Canon Digital Rebel XT / EOS 350D camera body and will not function on them. All other Canon DSLR cameras bodies work with Kenko DGX converters.

KENKO TELEPLUS DGX & DG SERIES MC4 AF 1.4 DGX






1.4X TELEPHOTO CONVERTER
MC4 AF 1.4 DGX

Placed between the camera body and lens, a teleconverter contains a set of optics that will effectively increase the focal length of any lens with which it is used. The KENKO TelePlus MC4 AF 1.4X DGX converter has the effect of multiplying the focal length of your lens by 1.4x.

The MC4 AF 1.4X DGX converter has genuine Gate Array IC (Integrated Circuitry). It means the converter’s unique circuitry maintains signal integrity between the camera body and lens. The 4-element design is made with high quality multi-coated optical glass supplied by Hoya Corporation, the world’s largest manufacturer of optical glass.

Full AF operation with the TelePlus MC4 AF 1.4X is possible using camera lenses with open apertures of F4 or brighter. Please be aware that AF will work properly only if there is enough light and contrast on the subject to activate the camera’s AF sensors properly. (Manual focusing may be necessary when using lenses with smaller open f-stop values than that given above.)

The DGX TelePlus converters have updated circuitry to record exif data more accurately. In the exif exposure data (meta-data recorded with a digital picture) DGX converters record the equivalent aperture and focal length of the lens setting plus teleconverter. Optically and mechanically they are identical to the prior high-quality DG series converters.

MC4 AF 1.4X DGX are available for Canon EOS (EF, not EF-S), Nikon AF and Sony Alpha
.

Important Note:The Kenko DGX TelePlus converters are not compatible with the Canon Digital Rebel XT / EOS 350D camera body and will not function on them. All other Canon DSLR cameras bodies work with Kenko DGX converters.

KENKO TELEPLUS DGX & DG SERIES Mc7 Af 2.0 Dgx









2X TELEPHOTO CONVERTER
MC7 AF 2.0 DGX

Placed between the camera body and lens, a teleconverter contains a set of optics that will effectively increase the focal length of any lens with which it is used. The KENKO TelePlus MC7 AF 2.0X DGX converter has the effect of multiplying the focal length of your lens by 2.0x, turning a 300mm lens into an equivalent 600mm lens.

The MC7 AF 2.0X DGX converter has genuine Gate Array IC (Integrated Circuitry). It means the converter’s unique circuitry maintains signal integrity between the camera body and lens. The 7-element design is made with high quality multi-coated optical glass supplied by Hoya Corporation, the world’s largest manufacturer of optical glass.

Full AF operation with the TelePlus MC7 AF 2.0X is possible using camera lenses with open apertures of F2.8 or brighter. Please be aware that AF will work properly only if there is enough light and contrast on the subject to activate the camera’s AF sensors. (Manual focusing may be necessary when using lenses with smaller open f-stop values than that given above.)

The DGX TelePlus converters have updated circuitry to record exif data more accurately. In the exif exposure data (meta-data recorded with a digital picture) DGX converters record the equivalent aperture and focal length of the lens setting plus teleconverter. Optically and mechanically they are identical to the prior high-quality DG series converters.

MC7 AF 2.0X DGX are available for Canon EOS (EF, not EF-S), Nikon AF and Sony Alpha
.

Important Note:The Kenko DGX TelePlus converters are not compatible with the Canon Digital Rebel XT / EOS 350D camera body and will not function on them. All other Canon DSLR cameras bodies work with Kenko DGX converters.

KENKO TELEPLUS DGX & DG SERIES Pro 300 Af Dg 3.0x







3X TELEPHOTO CONVERTER
PRO 300 AF DG 3.0X

Placed between the camera body and lens, a teleconverter contains a set of optics that will effectively increase the focal length of a lens by a specific amount. Common magnifications are 1.4 times and 2 times, but the Kenko Teleplus PRO 300 AF converter has a 3x magnification. For example, using a 3 times (3x) teleconverter will increase the focal of 300mm lens to 900mm.

The Teleplus PRO 300 converter is made with high quality multicoated optical glass supplied by Hoya Corporation, the worlds largest manufacturer of optical glass. The PRO 300 3x is designed for use with lenses of 50mm or above and work best with telephoto lenses of 100mm to 500mm. The PRO 300 3.0x can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for lenses that have a zoom range that starts under 50 mm.

KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s unique circuitry maintainS signal integrity between the camera body and lens. These converters are designed to electronically operate the same way an original manufacturer’s converter would provided there is enough light available.

Important Note: Due to the 3 stop light loss inherent in a 3x converter, Kenko PRO 300 3.0X has no AFcapabiltiy. The lens must be focused manually. The converter has all the circuitry for aperture activation and metering.



 

KENKO TELEPLUS DGX & DG SERIES Pro 300 Af Dgx 2.0 x




PRO 300 AF DGX 2.0X


1.4X TELEPHOTO CONVERTER
PRO 300 AF DGX 2.0X


KENKO Teleplus Pro 300 DGX converters are made with precision quality multi-coated optical glass supplied by Hoya Corporation, the worlds largest manufacturer of optical glass. These glass elements were designed to match the optical quality of the prime lens (even at the edges) and telephoto zoom lenses. The optical design of the elements and light path is wide enough not to cause vignetting.

The PRO 300 family are designed specifically to be used with prime telephoto lenses of 100mm or above, such as 300 mm f/2.8 lenses, and work best with telephoto lenses of 200mm to 500mm. The PRO 300 can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for zoom lenses that have a range starting under 50 mm.

KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s own unique circuitry maintains signal integrity between the camera body and lens. These converters are designed to electronically operate the same way as an original manufacturer’s converter.1

Full AF operation with PRO 300 2.0x DGX is possible when using camera lenses with maximum aperture of F2.8 or brighter. Please be aware that AF will work properly only if there is enough light and contrast on the subject to activate the camera’s AF sensors. (Manual focusing is required when using lenses with smaller maximum f-stop value than those given above.)

With the PRO 300 1.4x, DGX full AF operation is possible with camera lenses having a maximum aperture of F4 or brighter. The same light and contrast requirements apply.

The DGX Teleplus converters have updated circuitry to record exif data more accurately. In the exif exposure data (meta-data recorded with a digital picture) DGX converters record the equivalent aperture and focal length of the lens setting plus tele-converter. Optically and mechanically they are the identical to the prior high-quality DG series converters.
Most Canon EOS camera bodies are programmed to shut down auto focus if the calculated effective aperture for the lens and teleconverter is smaller than f/5.6, the Kenko Teleplus PRO 300 converters work the same way.

Important Note:The Kenko DGX TelePlus converters are not compatible with the Canon Digital Rebel XT / EOS 350D camera body and will not function on them. All other Canon DSLR cameras bodies work with Kenko DGX converters.

KENKO TELEPLUS DGX & DG SERIES Pro 300 Af Dgx 1.4x




PRO 300 AF DGX 1.4X

1.4X TELEPHOTO CONVERTER
PRO 300 AF DGX 1.4X

KENKO Teleplus Pro 300 DGX converters are made with precision quality multi-coated optical glass supplied by Hoya Corporation, the worlds largest manufacturer of optical glass. These glass elements were designed to match the optical quality of the prime lens (even at the edges) and telephoto zoom lenses. The optical design of the elements and light path is wide enough not to cause vignetting.

The PRO 300 family are designed specifically to be used with prime telephoto lenses of 100mm or above, such as 300 mm f/2.8 lenses, and work best with telephoto lenses of 200mm to 500mm. The PRO 300 can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for zoom lenses that have a range starting under 50 mm.

KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s own unique circuitry maintains signal integrity between the camera body and lens. These converters are designed to electronically operate the same way as an original manufacturer’s converter.1

Full AF operation with PRO 300 2.0x DGX is possible when using camera lenses with maximum aperture of F2.8 or brighter. Please be aware that AF will work properly only if there is enough light and contrast on the subject to activate the camera’s AF sensors. (Manual focusing is required when using lenses with smaller maximum f-stop value than those given above.)

With the PRO 300 1.4x, DGX full AF operation is possible with camera lenses having a maximum aperture of F4 or brighter. The same light and contrast requirements apply.

The DGX Teleplus converters have updated circuitry to record exif data more accurately. In the exif exposure data (meta-data recorded with a digital picture) DGX converters record the equivalent aperture and focal length of the lens setting plus tele-converter. Optically and mechanically they are the identical to the prior high-quality DG series converters.

Most Canon EOS camera bodies are programmed to shut down auto focus if the calculated effective aperture for the lens and teleconverter is smaller than f/5.6, the Kenko Teleplus PRO 300 converters work the same way.

Important Note:The Kenko DGX TelePlus converters are not compatible with the Canon Digital Rebel XT / EOS 350D camera body and will not function on them. All other Canon DSLR cameras bodies work with Kenko DGX converters.

KENKO TELEPLUS DGX & DG SERIES Pro 300 Af Dgx 1.4x




PRO 300 AF DGX 1.4X

1.4X TELEPHOTO CONVERTER
PRO 300 AF DGX 1.4X

KENKO Teleplus Pro 300 DGX converters are made with precision quality multi-coated optical glass supplied by Hoya Corporation, the worlds largest manufacturer of optical glass. These glass elements were designed to match the optical quality of the prime lens (even at the edges) and telephoto zoom lenses. The optical design of the elements and light path is wide enough not to cause vignetting.

The PRO 300 family are designed specifically to be used with prime telephoto lenses of 100mm or above, such as 300 mm f/2.8 lenses, and work best with telephoto lenses of 200mm to 500mm. The PRO 300 can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for zoom lenses that have a range starting under 50 mm.

KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s own unique circuitry maintains signal integrity between the camera body and lens. These converters are designed to electronically operate the same way as an original manufacturer’s converter.1

Full AF operation with PRO 300 2.0x DGX is possible when using camera lenses with maximum aperture of F2.8 or brighter. Please be aware that AF will work properly only if there is enough light and contrast on the subject to activate the camera’s AF sensors. (Manual focusing is required when using lenses with smaller maximum f-stop value than those given above.)

With the PRO 300 1.4x, DGX full AF operation is possible with camera lenses having a maximum aperture of F4 or brighter. The same light and contrast requirements apply.

The DGX Teleplus converters have updated circuitry to record exif data more accurately. In the exif exposure data (meta-data recorded with a digital picture) DGX converters record the equivalent aperture and focal length of the lens setting plus tele-converter. Optically and mechanically they are the identical to the prior high-quality DG series converters.
Most Canon EOS camera bodies are programmed to shut down auto focus if the calculated effective aperture for the lens and teleconverter is smaller than f/5.6, the Kenko Teleplus PRO 300 converters work the same way.

Important Note:The Kenko DGX TelePlus converters are not compatible with the Canon Digital Rebel XT / EOS 350D camera body and will not function on them. All other Canon DSLR cameras bodies work with Kenko DGX converters.

Sunday, October 3, 2010

KENKO PRO1D Lens Caps



PRO1D LENS CAPS- Newest design plastic cap with a finger hold in the middle.
-Easily attached and unattached with the lens hood on.
- Convenient sizes ranging from 52 to 77 mm.
-The logo is ‘PRO1D’.
-These high-quality caps match all types of lenses
AVAILABLE SIZES
52mm55mm58mm62mm67mm72mm
77mm

KENKO PRO1 R-72





R72.Most popular infrared filter in the world.Infrared filter helps cut down all other lights except infrared light, which is not visible to human eyes. Kenko R72 filter permits light of around 700 wavelenght to pass through, which is the most popular infrared filter in the world!


FEATURES

AVAILABLE SIZES
49mm
52mm55mm58mm62mm67mm72mm77mm82mm

KENKO PRO1 Ac Close-Up Lens No.3





AC CLOSE-UP LENS No.3.A world of new creativity.The CLOSE-UP No.3 lens turns a normal lens into a macro by reducing the lens, minimum focusing distance. Depth-of-field is shallow so use as small an aperture as possible. CLOSE-UP NO.3 offers a world of new creativity.



FEATURES

AVAILABLE SIZES
49mm
52mm55mm58mm62mm67mm72mm77mm82mm



KENKO PRO1 R-Cross Sreen









R-CROSS SCREENAdd a dramatic four-cross flare.The R-CROSS SCREEN filter adds a dramatic four-cross flare to very bright areas, giving a soft-focus effect. ldeal for photographs of night scene illumination or other scenes with strong reflections.



FEATURES


AVAILABLE SIZES
49mm
52mm55mm58mm62mm67mm72mm77mm82mm